Show simple item record

dc.contributor.advisorZhang, Jinwen
dc.contributor.advisorLaborie, Marie-Pierre
dc.creatorBrown, Elvie E.
dc.date.accessioned2011-06-29T17:50:21Z
dc.date.available2011-06-29T17:50:21Z
dc.date.issued2010
dc.identifier.urihttp://hdl.handle.net/2376/2809
dc.descriptionThesis (Ph.D.), Gene and Linda Voiland School of Chemical Engineering and Bioengineering, Washington State Universityen_US
dc.description.abstractBacterial cellulose (BC) and BC/fibrin composites were prepared and the static and dynamic mechanical properties were investigated to assess their suitability to artificial blood vessel applications. An important prerequisite for such applications is the ability to replicate the biological and mechanical properties of the blood vessels; and since published scientific works had observed both BC and fibrin to be biologically compliant, only mechanical properties were investigated in this study. Firstly, preparations of BC, BC/fibrin composites and their crosslinked counterparts were performed. BC/fibrin composites of varying compositions were produced by immersing never-dried-BC into fibrin/ionic liquid/DMSO solution in varied durations. The composite compositions were predicted from a calibration method based on calibration samples, FTIR data and Beer's law. Crosslinking was done by glutaraldehyde-treatment. Secondly, characterizations of static and dynamic mechanical properties were carried out by tensile test and cyclic loading test, respectively. The static test provided the data for the analysis of strength, modulus and elongation while the dynamic test for viscoelasticity and durability. The BC/fibrin composites and crosslinked BC had improved mechanical properties compared to their native components, however only the crosslinked BC/fibrin composites exhibited comparable strength, modulus, viscoelasticity and durability to the bovine blood vessel, indicating that the crosslinked composites were promising materials for artificial blood vessel applications. Additionally, the modification of fibrin content in the composites resulted in the modification of mechanical properties; such was desirable because real blood vessels exist in wide range of mechanical properties. The interactions and morphologies of the interfaces between BC and fibrin were investigated in relation to mechanical properties. The occurrence of crosslinking was believed to afford effective reinforcement in the BC/BC and/or BC/fibrin interfaces which imparted the significant mechanical improvement to the composites. The positive results obtained from the assessment of mechanical properties indicated that BC/fibrin composites are good potential artificial blood vessel materials. In the future, if an in vivo test will prove affirmative results, BC/fibrin composites, which have widely available resources and can be produced by simple method, may be used as blood vessel replacement material.en_US
dc.description.sponsorshipDepartment of Biomedical EngineeringMaterials Science, Washington State Universityen_US
dc.language.isoEnglish
dc.rightsIn copyright
dc.rightsNot publicly accessible
dc.rightsclosedAccess
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/
dc.rights.urihttp://www.ndltd.org/standards/metadata
dc.rights.urihttp://purl.org/eprint/accessRights/ClosedAccess
dc.subjectartificial blood vesselen_US
dc.subjectbacterial celluloseen_US
dc.subjectcompositeen_US
dc.subjectcyclic creepen_US
dc.subjectmechanical propertiesen_US
dc.subjecttensileen_US
dc.titleBACTERIAL CELLULOSE/FIBRIN COMPOSITES: PREPARATION AND MECHANICAL PROPERTIES OF POTENTIAL ARTIFICIAL BLOOD VESSEL MATERIAL
dc.typeElectronic Thesis or Dissertation


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record