Show simple item record

dc.creatorDaily, C.S.
dc.creatorSun, Weixing
dc.creatorKessler, Michael
dc.creatorTan, Xiaoli
dc.creatorBowler, N.
dc.date.accessioned2015-11-05T18:25:01Z
dc.date.available2015-11-05T18:25:01Z
dc.date.issued2014
dc.identifier.urihttp://hdl.handle.net/2376/5564
dc.description.abstractA three-phase theoretical model is proposed that is suitable for describing the effective permittivity of polymer-matrix composites containing spherical nanoparticles. The model accounts for the presence of an interphase region, which surrounds each nanosphere, whose permittivity is allowed to be different from that of the matrix polymer. The nanoparticles themselves are approximated as hard (non-overlapping) spheres, whereas the interphase regions of neighboring nanoparticles are permitted to overlap. The volume fraction of the interphase region is computed by assuming that the nanoparticles are arranged on the nodes of a simple-cubic lattice. The effective permittivity of the composite is subsequently computed via three-phase Wiener bounds. As an example application of the model, permittivity data measured on a silicon/bisphenol E cyanate ester nanodielectric and a low-density polyethylene/alumina nanodielectric are shown to lie outside the range of the two-phase Wiener bounds yet lie within the range of the three-phase Wiener bounds with appropriate choice of interphase permittivity and thickness.en_US
dc.languageEnglish
dc.publisherIEEE Transactions on Dielectrics and Electrical Insulation
dc.rightsCreative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subjectDielectric materials
dc.subjectInterphase
dc.subjectModeling
dc.subjectNanotechnology
dc.titleModeling the interphase of a polymer-based nanodielectric
dc.typeArticle
dc.description.citationC. S. Daily, W. Sun, M. R. Kessler, X. Tan, N. Bowler: Modeling the Interphase of a Polymer-based Nanodielectric, IEEE Transactions on Dielectrics and Electrical Insulation, 2014, 21(2), 488-496. DOI: 10.1109/TDEI.2013.004181.


Files in this item

Thumbnail

This item appears in the following Collection(s)

  • Kessler, Michael
    This collection features research by Michael Kessler, professor in the School of Mechanical and Materials Engineering at Washington State University.

Show simple item record

Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International
Except where otherwise noted, this item's license is described as Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International